
14.3 Removing the RWD/FWD castor wheel.
Note the position of the castor & which hole is used to mount it.
Ensure that both castors use the same mount position.
Use a 5.0mm hex key & 13.0mm open spanner to remove the
axle studs, (Fig.14.9).
Remove the centre spindle, (Fig.14.10).
In the case of pneumatic tyres, let the air out of the tyre. Undo
the 5 studs in the sequence shown. Refit and tighten to a torque
of 15-20Nm. (Fig.14.11).
Lift the hubs out, (Fig.14.12).
Gently feed the tube out of the tyre, (Fig.14.13).
Fig. 14.9
Fig. 14.10
Fig. 14.12
Fig. 14.13
Fig. 14.11
1
2
3
4
5
Kommentare zu diesen Handbüchern