Quickie Groove Technical Information PDF herunterladen (Seite 46)

46 Quickie Groove

.EMS

13.13 Transit Kit Fitting Instruction / Front-tie down

Brackets onto Perfect Fit Seating System / Kit P/N015605

Tools required to fit front tie-downs to Perfect Fit Seating

Systems:

5mm hex (Allen) wrench and 4mm hex (Allen) wrench,

(Fig.13.29).

OLD STYLE BRACKET.

1. RELOCATE LAMPS, IF FITTED, (Fig.13.30).

Slide lamp upwards/off lamp bracket, Slacken 2 screws in lamp

bracket and slide bracket along rail to new location

2. INSERT CHANNEL NUTS, (Fig.13.31).

Remove hanger (if fitted)

Slacken 3 screws fitted to hanger plate, remove 2 upper screws/

washers from hanger plate, slide 2 existing channel nuts

rearward and slide 2 new channel nuts into rail

3. REFIT HANGER PLATE, (Fig.13.32).

Loosely replace 2 upper screws/washers into hanger plate.

4. FIT FRONT TIE-DOWN BRACKET (Fig.13.33)

Secure tie-down to channel nuts with 2 M6 x 10 screws and 2

washers. Fully tighten all screws

5. FINAL ASSEMBLY, (Fig.13.34).

Replace lamps and hanger (if fitted), apply tie-down label

(correct orientation), repeat process for opposite side of chair.

Fig. 13.29

Fig. 13.30

Fig. 13.31

Fig. 13.32

Fig. 13.33

Fig. 13.34

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 65 66

Keine Kommentare

Quickie Groove Technical Information Seite 46