
The forus push handle mechanism is centred with springs
which will always bring it back to its centre position when the
attendant’s hands are taken off the handles. The push handles
can be adjusted in height by releasing the spring loaded pin on
the side, adjusting to the right height position and releasing the
pin. (Fig 10.3)
10.7.1 Emergency stop button
The forus attendant control is equipped with an EMERGENCY
STOP button (Fig 10.3). When pressed, it brings the chair to a
controlled stop.
When the button is pressed, it automatically locks mechanically
in that position. To release twist and pull the EMERGENCY
STOP button until it locks into the off position. The chair can
now be switched on.
NOTE: Always move the chair with care. If the programming
of the attendant drive profile(s) needs adjustments to make it
more convenient for the attendant and/or the person sitting in
the wheelchair please contact your Sunrise Service agent for
adaptation.
If the direction of movement of the forus attendant control needs
to be altered please contact your authorised Sunrise Medical
dealer for adaptation.
10.8 Powered swing away arm (R-net)
This option (Fig 10.4) is used to mount all chin controls or the
sip and puff and can be operated by either a buddy button or
ribbon switch
WARNING!
Please be aware of your surroundings before operating the
swing-away arm. Make sure that you have sufficient room
to your side to prevent damage to your control device and to
prevent injury to others.
WA R NI NG!
Please be aware that it is possible to accidentally operate your
swing-away arm whilst you are driving your chair. Make sure
that you are comfortable with the position of your control
switch before using your chair
The powered swing away operates with R-net controls only.
Powered Swing-away with R-net Chin Control
Please refer to the R-net Owner’s Manual for details
of R-net hand control functions
Fig. 10.4
Kommentare zu diesen Handbüchern