Quickie Groove Technical Information PDF herunterladen (Seite 21)

Quickie Groove 21

.EMS

5.8.4 Manual/Articulating elevating legrest (ALR/ELR)

To elevate:

Pull the legrest upwards and stop at the desired height. The

legrest will automatically lock in the chosen position.

To lower:

Push the release lever slowly forward. The legrest will lower the

angle. As soon as you release the lever, the legrest will be locked

in the current position.

WARNING!

Keep hands clear of the adjustment mechanism between the

frame and the movable parts of the legrest while elevating or

lowering the legrest.

NOTE: Please refer to Section 7 for details of your controls

5.8.5 Powered elevating or articulating leg rest

NOTE: Both legrests can also be operated simultaneously.

To operate a powered leg rest:

VR2 Control:

The actuator buttons can operate any factory approved actuator.

Operation is dependent on what options are fitted to your

wheelchair, (Fig.5.18).

To operate the legrests, seat tilt, seat lift or backrest recline.

• Push one of the actuator buttons that has the seat icon on it

to select actuator mode.

• Operate the joystick left or right to select the actuator

required (actuator 1 or actuator 2). Selection is indicated via

the lighting of the red LED adjacent to the desired actuator

button.

• Operate the joystick in the forward or rearward direction to

move the leg rest/seat lift/tilt or recline up or down.

• Release the joystick when the desired angle is reached.

• To return to drive mode press the actuator button again.

CAUTION!

Once the leg rest is fully lifted or in its lowest position do not

hold the joystick in its operat ing position as this could damage

the actuator..

R-net Control

Please refer to your R-net Owner’s Manual for details.

Fig. 5.18

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 65 66

Keine Kommentare

Quickie Groove Technical Information Seite 21