Quickie Groove Technical Information PDF herunterladen (Seite 47)

Quickie Groove 47

.EMS

NEW STYLE BRACKET.

1. REMOVE LAMPS, IF FITTED, (Fig.13.30).

Slide lamp upwards/off lamp bracket,

2. REMOVE LAMP BRACKET, (Fig.13.36).

Undo both screws and keep them for re-use. Remove the old

lamp bracket.

3. FIT COMBINED LAMP/TIE DOWN BRACKET,

(Fig.13.37).

Slide the existing 2 channel nuts into place. Place the new

bracket behind the hanger bracket as shown above. Insert the 2

screws and tighten.

4. REFIT LAMPS, (Fig.13.38).

13.14 Front Tie-down Brackets onto Rehab and Recaro

Seating Systems – Kit P/N 015604

Tools required to fit front tie-downs to Rehab and Recaro

Seating Systems:

• 17, 13 and 10mm combination spanners

• 5mm hex (Allen) wrench

• 4mm hex (Allen) wrench

1. RELOCATE LAMPS (IF FITTED AND NECESSARY)

(Fig.13.40). Slide lamp upwards/off lamp bracket

Remove M10 bolt from beneath lamp outer bracket

Remove lamp outer bracket, remove M6 screw, washer and nut,

relocate lamp inner bracket, replace all fasteners and brackets

2. REMOVE HANGER SCREW, (Fig.13.41)

Slacken and remove hanger M8 screw, washer (and nut, if

fitted)

Fig. 13.35

Fig. 13.36

Fig. 13.37

Fig. 13.38

Fig. 13.39

Fig. 13.40

M10 BOLT

M6 SCREW

INNER BRACKET

OUTER BRACKET

Fig. 13.41

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 65 66

Keine Kommentare

Quickie Groove Technical Information Seite 47