
PULSE 6 SERVICE MANUAL
PAGE 7.15
2009SUNRISE MEDICAL
Section 7
Caution: the actuator and micro-switch assembly wires are fragile. Use caution when removing
the actuator and micro-switch assembly.
8. Remove the actuator and micro-switch
assembly as one part if the entire assembly is to
be replaced (fi g. 7.44). Reverse the procedures
to install and retest as necessary.
Note: Perform this step if only the actuator is
to be replaced.
9. Note the connections of the wires and
separate them (fi g. 7.45). Remove the actuator.
10. Reverse the previous procedure to install
the actuator/micro-switch assembly. Retest as
necessary.
Removal Procedures (cont.)
fig. 7.44
fig. 7.45
Kommentare zu diesen Handbüchern