Quickie Pulse Wartungshandbuch PDF herunterladen (Seite 51)

PULSE 6 SERVICE MANUAL

PAGE 7.4

2009SUNRISE MEDICAL

Section 7

6. Remove the gearbox release lever from

the motor/gearbox assembly by removing the

cotter pin (ﬁ g. 7.12). Use a new cotter pin when

replacing the lever.

Note: For the next procedure, use either a

ball-type 5 mm Allen wrench or a cut-down 5

mm Allen wrench.

7. Remove the 4 bolts securing the motor/

gearbox assembly to the motor mount using a 5

mm Allen wrench (ﬁ g. 7.13).

8. Lift the motor out from the side of the power

chair (ﬁ g. 7.14).

9. Replace the motor/gearbox assembly by

reversing the previous procedures.

Removal Procedures (cont.)

fig. 7.12

fig. 7.13

fig. 7.14

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 61 62

Keine Kommentare

Quickie Pulse Wartungshandbuch Seite 51