Fig.12.1
Fig.12.2
Fig.12.3
Fig.12.4
Fig.12.5
Fig.12.7
Fig.12.8
12.3 Castor wheel replacement
To remove the Castor Wheel
Ensure that the wheelchair brake release •
levers are in the DRIVE position.
With all wheels still on the ground, use a •
17.0mm spanner and a 14.0mm socket wrench
to partially loosen the axle nuts, (Fig.12.8).
Lift the wheel off the ground & secure the •
wheelchair with blocks or stands, (Fig.12.9).
Withdraw the loosened axle stud, (Fig12.10).•
Note that there are spacers between the •
castor forks and wheel, (Fig.12.11).
To refit, just reverse the above process.•
Tighten the castor axle stud to a torque of •
15Nm.
Please see overleaf for (Fig.12.9-12.11).
Fig.12.6
Kommentare zu diesen Handbüchern